How To Remove Honeywell Thermostat From Account

Honeywell Lyric Thermostat Commuter Release Notes

Introduction

The Honeywell Lyric line is a set of smart thermostats. The Lyric thermostats have been tested and certified for integration with the ClareHome organization.

By integrating the Lyric thermostat to a ClareHome control system, your customers tin can transport commands to the thermostat to modify its modes, cool and rut settings, and fan status from their mobile iOS devices or Android smartphone.

When integrating the Lyric thermostat into your ClareHome project, no wires or extra connections are necessary. Install the Lyric according to its documentation, then connect it directly to home network'due south Wi-Fi.

The Lyric thermostat integrates with the ClareHome system in a way similar to existing HVAC drivers. All HVAC drivers share a common UI to proceed user experiences consequent.

Supported Honeywell Lyric thermostats models

T-5 Smart

RCHT8610WF2006	RCHT8610WF2014
RCHT8610WF3005	RCHT8612WF2005
RCHT8612WF2015	RCHT8612WF3006

T-vi Pro Smart

TH6220WF2006

TH6320WF2003

T-9 Smart

RCHT9510WFW2001	RCHT9510WFW2017
RCHT9610WFSW2003	RCHT9610WFSW2019

Round Smart

TH8732WFH5002	RCH9310WF5003
RCH9310WF5011

The Following figure shows the Lyric controls on the ClareHome UI.

Figure ane: User interface of the Honeywell Lyric thermostat

(one)  Temperature setting displays on the ClareHome UI in Fahrenheit.
(ii)  Change the Heat prepare betoken by sliding the indicator left/right on the bar.
(3)  Change the Oestrus set indicate past sliding the indicator left/right on the bar.
(iv)  Change the Functioning mode past borer the desired radio push button.
(5)  Change the Fan mode by borer the desired radio push button.

Installing the Lyric thermostat

A qualified installation technician should install the Lyric thermostat. Refer to the documentation included with your Lyric devices. Clare Controls does non assume any responsibility for amercement caused by improper installation or connection to the network. Annals your thermostat on the Lyric website/app before adding and configuring the device in the ClareHome app.

Connecting the Lyric thermostat to ClareHome

Use the Honeywell Lyric app. One time the app is installed, follow the displayed on-screen instructions for thermostat and account setup.

Adding and removing the thermostat in the ClareHome App

Once you have installed and setup the thermostat using the Honeywell Lyric app, add and configure information technology with the ClareHome app.

Notes

• An internet connectedness is required when adding a Lyric device. Information technology cannot be added when the CLIQ.mini is in AP mode.
• You volition need the homeowner's Honeywell Lyric account credentials.
• The Honeywell Lyric thermostats must be added and configured on the Honeywell website before they tin be added to ClareHome.

To add the thermostat in the ClareHome app:

1. Tap the ClareHome app's Devices page.

   

2. Tap Manage Devices.

   

3. Tap Add Devices.

   

4. Select the device category, Climate.

   

5. Tap Honeywell – Lyric T-Series, Lyric Round.

   

6. Read the displayed Device Authorization bulletin, and and then tap Authorize Device.

   
   The Lyric Login page displays.

   

7. Login with the credentials created using the Honeywell app.
   You are prompted to authorize ClareHome access to the Honeywell thermostat.

   

8. Tap Allow, and then select the desired available thermostat devices.
   Note: Each device added this fashion appears on this Clare Controls account.

   

9. Tap CONNECT.
   Once the devices are authorized, a success message displays, the thermostats are at present accessible in the ClareHome app.
10. Once paired in, the Edit Device folio displays.
    Customize the device name and location as desired, tapping Salve when done.
    Note: For scenes, notifications, schedules, and automations configuration, see ClareHome App Guide (Md ID 1750).

To remove the thermostat in the ClareHome app:

1. Tap the ClareHome app'southward Devices

   

2. Tap Manage Devices.
   
3. Tap Edit Devices.

   

4. Tap the 3 dots next to the thermostat, and and then tap Remove.

   

5. TapConfirm.

   

Pairing and removing the thermostat in FusionPro

Pair the thermostat to the project.

To add together the thermostat in FusionPro:

1. Click Accounts in the side menu.

   

2. Locate the desired account in the list, then click View.
   The Account sub-card is at present bachelor.

   

3. Click the Devices tab, and then click Add Devices.

   

4. Select the device category (Climate).

   

5. Click Honeywell – Lyric T-Series Round.

   
   The Lyric Login folio displays.

   

6. Login with the credentials created using the Honeywell app.
   You are prompted to authorize ClareHome admission to the Honeywell thermostat.
7. Click Allow.

   

8. Select the desired bachelor thermostat devices.
   Notation: Each device added this way appears on this Clare Controls account.

   

9. Click CONNECT.
   Once the devices are authorized, a success message displays, the thermostats are now accessible in the ClareHome app.
10. Once paired in, the Edit Device page displays.
    Customize the device proper name and location as desired, tapping Save when done.
    Notation: For scenes, notifications, schedules, and automations configuration, see ClareHome App Guide (DOC ID 1750).

To remove the thermostat with FusionPro:

1. Click Accounts in the side carte du jour.

   

2. Locate the desired account in the list, and then click View.
   The Account sub-card is now available.

   

3. Click the Devices tab, and and then click Delete next to the desired device.

   

4. Click Delete to confirm.

   

Total PDF - Honeywell Lyric Thermostat Driver Release Notes (DOC ID 1579)

Source: https://www.clarecontrols.com/helpcenter/honeywell-lyric-thermostat-integration-release-notes-doc-id-1579

Share this post