Rust-Oleum Projects

How to Paint Your Rims with Peelable Spray Paint

Browse Projects

  • Krud Kutter Wheels

    Clean Car Wheels Without Drips

  • Spray paint on car being cleaned off with Krud Kutter Graffiti Remover

    Remove Spray Paint From A Car With Krud Kutter Graffiti Remover

Peel Coat Painted Rims Afterwards

  • Estimated Fourth dimension

    3 Hours

  • Claiming Level

    Intermediate

  • Tools & Supplies:

    • Driblet textile

    • Garbage Bags

    • Alphabetize Cards

    • Painter'south record

    • Utility knife

With peelable spray paint, it's easy and affordable to customize your rims equally often as yous'd similar. Here'due south how we painted our rims in a few steps.

  1. PREPARE: Before yous offset, wash your rims with soap and water, rinse, and so allow them dry completely. This ensures that your paint applies evenly and removes correctly. Adjacent, weave a garbage bag behind the spokes of each rim to protect the caliper, brake pads, and brake rotors from pigment. So use painter's record to comprehend the lug basics and air valve stem. To protect your tires, drape a garbage handbag over the whole tire and use a utility knife to cut a hole around the rim. Exist careful not to cut into the tire. Record the handbag in place to cover all of the tire. Then, place index cards overlapping between the rim and tire for a clean line around the rim.
  2. PAINT: To start painting, first shake your can of Peel Coat for one minute after the mixing brawl starts rattling. To utilise your first glaze, concur the can 8-12" abroad from your rim and spray in a back-and-forth motion, slightly overlapping each stroke. You should aim for about 50 per centum coverage on your first coat, meaning you can see most one-half of the rim through your first coat of spray paint. Then, use 4 or more than additional coats (allowing 5 minutes in between each) to build the coating. The more coats you apply, the easier it will be to remove the paint when you're ready.
  3. FINISH: Immediately afterward applying your final glaze, carefully remove the painter'southward tape and index cards from the tire. Then, wait for the pigment to dry to the affect earlier carefully removing the garbage bags. Let your new rims dry out for at least 24 hours before taking them out on the road. Once dry, your new rims volition withstand rain, car washes, and regular wear and tear from driving.
  4. REMOVE: When yous're ready to remove the paint from your rims, slowly rub an outer edge of the pigment until information technology starts to skin up. Once you get the border started, skin away the paint working from the outside of the rim toward the middle. For easiest removal, nosotros recommend peeling the paint within six months.